Select your PLC brand to identify your protocol and MOFF support status.
S7-1200 and S7-1500 support native OPC-UA, fully supported by MOFF today. Older S7-300/400 is read directly over S7comm, supported today. PROFINET-only setups: bridge via OPC-UA.
OPC-UA: NOWS7comm: NOWControlLogix and CompactLogix are read directly over EtherNet/IP (CIP), supported today. No gateway needed.
EtherNet/IP: NOWModicon M340/M580 supports both Modbus TCP and OPC-UA natively. Both fully supported by MOFF today.
OPC-UA: NOWModbus TCP: NOWTwinCAT 3 has excellent native OPC-UA support, fully supported today.
OPC-UA: NOWNX/NJ series supports OPC-UA natively. FINS over Ethernet is on the roadmap.
OPC-UA: NOWFINS: RoadmapAC500 PLC supports both Modbus TCP and OPC-UA. Both fully supported today.
OPC-UA: NOWModbus TCP: NOWOlder Danfoss drives use Modbus RTU or PROFIBUS. Modbus RTU/TCP is fully supported.
Modbus RTU/TCP: NOWPROFIBUS: RoadmapSCADA-RTU telemetry over IEC 60870-5-104 is supported today. IEC 61850 and DNP3 are on the roadmap; bridge those via OPC-UA gateway for now.
IEC 60870-5-104: NOWIEC 61850 / DNP3: RoadmapBuilding systems are read directly over BACnet/IP, supported today.
BACnet/IP: NOWMost controllers built after 2015 support OPC-UA or Modbus TCP. Both fully supported today. Book a demo and we identify your stack together.
OPC-UA + Modbus TCP: NOWSix questions about the controllers you run, where the data needs to go, and which regulation applies. No email required to see the result.
2 minutes. Personalised fit report for your site.
Select all that apply. Not sure?
30 minutes. Real PLC data. No slides.
No commitment. No sales pressure.
Want to see it running against your own protocols?